摘要Ti and urea mixed according to the molar ratios of 2:1, 3:1 and 4:1 are milled under the same condition. The structures of the as-synthesized powders are analyzed by an x-ray diffractometer (XRD). The decomposed temperature of the urea and the products decomposed are characterized by differential scanning calorimetry (DSC) and thermogravimetry analysis-Fourier transform infrared (TG-FTIR) spectrometry. The results show that the reaction progress is a diffusion reaction. The efficiency of TiN synthesized by reactive ball milling can be increased by increasing the content of Ti. The reactive ball milling time decreases from more than 90h to 40h corresponding to the content ratio between Ti and urea increasing from 2:1 to 4:1. Ammonia gas (NH3) and cyanic acid (HNCO), the decomposed products of urea, react with the refined Ti to form TiN. The grain refinement of Ti has a significant effect on the efficiency of reactive ball milling.
Abstract：Ti and urea mixed according to the molar ratios of 2:1, 3:1 and 4:1 are milled under the same condition. The structures of the as-synthesized powders are analyzed by an x-ray diffractometer (XRD). The decomposed temperature of the urea and the products decomposed are characterized by differential scanning calorimetry (DSC) and thermogravimetry analysis-Fourier transform infrared (TG-FTIR) spectrometry. The results show that the reaction progress is a diffusion reaction. The efficiency of TiN synthesized by reactive ball milling can be increased by increasing the content of Ti. The reactive ball milling time decreases from more than 90h to 40h corresponding to the content ratio between Ti and urea increasing from 2:1 to 4:1. Ammonia gas (NH3) and cyanic acid (HNCO), the decomposed products of urea, react with the refined Ti to form TiN. The grain refinement of Ti has a significant effect on the efficiency of reactive ball milling.
(Powder processing: powder metallurgy, compaction, sintering, mechanical alloying, and granulation)
引用本文:
SUN Jin-Feng;LI Xiao-Pu;LIANG Bao-Yan;ZHAO Yu-Cheng;WANG Ming-Zhi. Effects of Raw Material Content on Efficiency of TiN Synthesized by Reactive Ball Milling Ti and Urea[J]. 中国物理快报, 2009, 26(7): 78102-078102.
SUN Jin-Feng, LI Xiao-Pu, LIANG Bao-Yan, ZHAO Yu-Cheng, WANG Ming-Zhi. Effects of Raw Material Content on Efficiency of TiN Synthesized by Reactive Ball Milling Ti and Urea. Chin. Phys. Lett., 2009, 26(7): 78102-078102.
[1] Sun K 1995 Vanadium and Titanium 5 23 [2] Oliveira M M and Bolton J D 1999 J. Mater. Process.Tech. 92-93 15 [3] Liu N, Xu Y D, Li H, Chen M H, Zhou J, Xie F and Yang H D2005 J. Mater. Process. Tech. 161 478 [4] Liu N, Xu Y D, Li H, Li G H and Zhang L D 2002 J.Eur. Ceram. Soc. 22 2409 [5] Wang Z A, Dai H Y and Zou Y 2008 Rare Metals 27 5 [6] Ajoy Kumar Ray, Venkateswarlu K, Chaudhury S K, Das S K,Ravi Kumar B and Pathak L C 2002 Mat. Sci. Eng. A 338160 [7] Rong X Z, Tsurumi T, Fukunaga O and Yano T 2002 Diam.Relat. Mater. 11 280 [8] Russias J, Cardinal S, Aguni Y, Fantozzi G, Bienvenu K andFontaine J 2005 Int. J. Refract. Met. H. 23 358 [9] Luo X S. 1997 Powder Metallurgy Industry 7 28 [10] Zhang G J 1990 J. Chin. Ceram. Soc. 18 277 [11] Munir Z A, Deevi S and Eslamloo-Grami M 1988 HighTemp. High Press. 20 19 [12] Qiu L X, Yao B, Ding Z H, Zheng Y J, Jia X P and Zheng WT 2008 J. Alloys Compd. 456 436 [13] Zhang F, Kaczmarek W A, Lu L and Lai M O 2000 J.Alloys Compd. 307 249 [14] Wexler D, Cakla A and Mosbah Ahmed Y 2000 J. AlloysCompd. 309 201 [15] Calka A 1991 Appl. Phys. Lett. 59 1568 [16] Yuan Y and Wang S W 1996 Urea (Beijing: Chemical IndustryPress) p 2 (in Chinese)
2009, Vol. 26 
