摘要Hexagonal boron carbonitrogen (h-BCN) compound is synthesized from a mixture of boron powder and CNH compound prepared by pyrolysis of melamine (C3H6N6) under high temperature (1400--1500°C) and high pressure (5.0--5.5GPa). X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy and Raman spectroscopy are used to determine the chemical composition and bonds of the product. The results show that the product has composition of B0.18C0.64N0.16 (near BC4N) and atomic-level hybrid. X-ray diffraction analysis indicates that the powder has a hexagonal network structure. Scanning and transmission electron microscopy results suggest that h-BCN compound morphology is mainly flaky in width about 1μm and thickness 200nm.
Abstract:Hexagonal boron carbonitrogen (h-BCN) compound is synthesized from a mixture of boron powder and CNH compound prepared by pyrolysis of melamine (C3H6N6) under high temperature (1400--1500°C) and high pressure (5.0--5.5GPa). X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy and Raman spectroscopy are used to determine the chemical composition and bonds of the product. The results show that the product has composition of B0.18C0.64N0.16 (near BC4N) and atomic-level hybrid. X-ray diffraction analysis indicates that the powder has a hexagonal network structure. Scanning and transmission electron microscopy results suggest that h-BCN compound morphology is mainly flaky in width about 1μm and thickness 200nm.
YANG Da-Peng;LI Ying-Ai;YANG Xu-Xin;DU Yong-Hui;JI Xiao-Rui;GONG Xi-Liang;SU Zuo-Peng;ZHANG Tie-Chen. Chemical Synthesis and Characterization of Flaky h-BCN at High Pressure and High Temperature[J]. 中国物理快报, 2007, 24(4): 1088-1091.
YANG Da-Peng, LI Ying-Ai, YANG Xu-Xin, DU Yong-Hui, JI Xiao-Rui, GONG Xi-Liang, SU Zuo-Peng, ZHANG Tie-Chen. Chemical Synthesis and Characterization of Flaky h-BCN at High Pressure and High Temperature. Chin. Phys. Lett., 2007, 24(4): 1088-1091.
[1] Liu A Y, Wentzcovitch R M and Cohen M L 1989 Phys. Rev. B 39 1760 [2] Huang F L, Cao C B, Xiang X, Lv R T and Zhu H 2004 Diam. Relat.Mater. 13 1757 [3] Sauter D, Weinmann M, Berger F, Lamparter P, Muller K and AldingerF 2002 Chem. Mater. 14 2859 [4] Tadao Y, Shuichi U and Takashi S 2004 Diam. Relat.Mater. 13 1130 [5] St\"ockel S, Weise K, Dietrich D, Thamm T, Braun M, CremerR, Neusch\"utz D and Marx G 2002 Thin Solid Films 420/421 465 [6] Wada Y, Yap Y K, Yoshimura M, Mori Y and Sasaki T 2000 Diam. Relat. Mater. 9 620 [7] Kim D H, Byon E, Lee S, Kim J K and Ruh H 2004 Thin SolidFilms 447/448 192 [8] Knittle E, Kaner R B, Jeanloz R and Cohen M L 1995 Phys.Rev. B 51 12149 [9] Nakano S, Akaishi M, Sasaki T and Yamaoka S 1994 Chem.Mater. 6 2246 [10] Zhang Y F, Tang Y H, Lee C S, Bello I and Lee S T 1999 Diam.Relat. Mater. 8 610 [11] Yao B, Liu L and Su W H 1999 J. Appl. Phys. 86 2464 [12] Badzian A R 1981 Mater. Res. Bull. 16 1385 [13] Bai S Z, Yao B and Su W H 2005 ActaPhys. Sin. 544627 (in Chinese) [14] Watannbe M O, Itoh S, Mizushima K and Sasaki T 1996 Appl. Phys. Lett. 68 2962 [15] Gomez-Aleixandre C, Essafti A and Albella J M 2000 J.Phys. Chem. B 104 4397 [16] Watanabe M O, Itoh S, Mizushima K and Sasaki T 1996 ThinSolid Films 281/282 334 [17] Marton D, Boyd K J, Al-Bayati A H, Todorov S S and Rabalais J W1994 Phys. Rev. Lett. 73 118 [18] Yu J, Wang E G, Ahn J, Yoon S F, Zhang Q, Cui J and Yu M B2000 J. Appl. Phys. 87 4022 [19] Zhou Z F, Bello I, Lei M K, Li K Y, Lee C S and Lee S T 2000 Surf. Coat. Technol. 128/129 334 [20] Gago R, Jim\'enez I, Agull?rueda F, Albella J M, Czig\'any Z andHultman L 2002 J. Appl. Phys. 92 5177