CONDENSED MATTER: STRUCTURE, MECHANICAL AND THERMAL PROPERTIES |
|
|
|
|
Dynamic Spallation in Uranium under Laser Shock Loading |
Da-Wu Xiao1, Hua Shu2, Dong-Li Zou1, Chao Lu1, Li-Feng He1** |
1Institute of Materials, China Academy of Engineering Physics, Mianyang 621700 2Institute of Laser, China Academy of Engineering Physics, Mianyang 621907
|
|
Cite this article: |
Da-Wu Xiao, Hua Shu, Dong-Li Zou et al 2019 Chin. Phys. Lett. 36 026201 |
|
|
Abstract The spall behavior of uranium is investigated using direct laser ablation loading experiments. The uranium targets are cut and ground to 0.05 mm, 0.1 mm, and 0.15 mm in thickness. Laser energies are varied to yield a constant peak pressure. This results in different strain rates and varying degrees of damage to the uranium targets. The spall strength is calculated and analyzed from the free surface velocity histories recorded using a line velocity interferometer for any reflections system. The spall strength increases from 4.3 GPa to 9.4 GPa with strain rates ranging from $4.0\times10^{6}$ s$^{-1}$ to $1.7\times10^{7}$ s$^{-1}$. Post-mortem analysis is performed on the recovered samples, revealing the twin-matrix interfaces together with the inclusions to be the primary factor governing the spall fracture of uranium.
|
|
Received: 18 September 2018
Published: 22 January 2019
|
|
PACS: |
62.50.-p
|
(High-pressure effects in solids and liquids)
|
|
62.50.Ef
|
(Shock wave effects in solids and liquids)
|
|
62.20.mm
|
(Fracture)
|
|
|
Fund: Supported by the Science Foundation of China Academy of Engineering Physics under Grant No A090504. |
|
|
[1] | Robbins D L and Sheffield S A 2013 LA-UR 0962 | [2] | Kozlov E A, Bondarchuk S V, Zuev Y N et al 2011 Phys. Met. Metallogr. 111 410 | [3] | Kozlov E A, Pankratov D G, Taranov V I et al 2009 Phys. Met. Metallogr. 108 401 | [4] | Zaretsky E, Herrmann B and Shrarts D 2006 Pflügers Arch. - Eur. J. Physiol. 134 971 | [5] | Zurek A K, Embury J D, Kelly A et al 1997 SCCM AIP Conf Proc. 429 423 | [6] | Hixson R S, Vorthman J E, Gustavsen R L et al 1997 SCCM AIP Conf Proc. 429 479 | [7] | Grady D E 1986 Metallurgical Applications of Shock-Wave and High-Strain-Rate Phenomena (New York: Marcel Dekker) p 763 | [8] | Cochran S and Banner D 1977 J. Appl. Phys. 48 2729 | [9] | Robbins D L, Kelly A M, Alexander D J et al 2001 SCCM AIP Conf Proc. 620 499 | [10] | Mccabe R J and Teter D F 2006 J. Microsc. 223 33 | [11] | Phipps C R 1988 J. Appl. Phys. 64 1083 | [12] | Pedrazas N A, Worthington D L, Dalton D A, Sherek P A, Steuck S P, Quevedo H J, Bernstein A C, Taleff E M and Ditmire T 2012 Mater. Sci. Eng. A 536 117 | [13] | Cuq-Lelandais J P, Boustie M, Soulard L, Berthe L et al 2010 EPJ. Web Conf. 10 00014 | [14] | Moshe E, Eliezer S, Dekel E et al 1998 J. Appl. Phys. 83 8 | [15] | Remington T P, Hahn E N, Zhao S et al 2018 Acta Mater. 158 313 | [16] | Grady D E 1988 J. Mech. Phys. Solids 36 353 |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|