| CONDENSED MATTER: STRUCTURE, MECHANICAL AND THERMAL PROPERTIES |
|
|
|
|
Fe–Al Phase Formation Studied by Internal Friction during Heating Process |
| Gang-Ling Hao1**, Yu-Chuan Li1, Xing-Fu Wang2, Wei-Guo Wang1, Xin-Fu Wang1, Dan Wang1, Xian-Yu Li1 |
1College of Physics and Electronic Information, Yan'an University, Yan'an 716000
2Key Laboratory of Materials Physics, Institute of Solid State Physics, Chinese Academy of Sciences, Hefei 230031
|
|
| Cite this article: |
|
Gang-Ling Hao, Yu-Chuan Li, Xing-Fu Wang et al 2020 Chin. Phys. Lett. 37 036102 |
|
|
|
|
Abstract We systematically investigate the internal friction properties of a Fe–(43 at.%)Al powder mixture compact during the heating process with the expectation to understand the phase formation and transition process. Three internal friction peaks are successively observed during the heating process from room temperature to 750$^{\circ}\!$C, but almost completely disappear in the subsequent cooling process. Three internal friction peaks exhibit obvious measuring frequency dependence, which increases with decreasing the frequency. The first internal friction peak originates from the micro-sliding of weak bonding interface between Al particles corresponding to a recrystallization process of deformed Al particles. The second internal friction peak is attributed to a phase formation process associated with the formation of the intermediate phase Fe$_{2}$Al$_{5}$. The third internal friction peak is considered to result from the formation of the FeAl intermetallic compound owing to the reaction of Fe$_{2}$Al$_{5}$ and residual Fe initiated by a dramatic thermal explosion reaction.
|
|
|
Received: 27 October 2019
Published: 22 February 2020
|
|
| PACS: |
61.72.Hh
|
(Indirect evidence of dislocations and other defects (resistivity, slip, creep, strains, internal friction, EPR, NMR, etc.))
|
| |
61.50.Ks
|
(Crystallographic aspects of phase transformations; pressure effects)
|
| |
81.20.Ev
|
(Powder processing: powder metallurgy, compaction, sintering, mechanical alloying, and granulation)
|
| |
64.70.kd
|
(Metals and alloys)
|
|
|
| Fund: Supported by the National Natural Science Foundation of China under Grant Nos. 51661032 and 51301150, the Special Program of Science and Technology New Star of Shaanxi Province under Grant No. 2013KJXX-11. |
|
|
|
| [1] | Sauthoff G 1996 Mater. Corros. 47 589 | | [2] | Gedevanishvili S and Deevi S C 2002 Mater. Sci. Eng. A 325 163 | | [3] | Liu C T 1998 Mater. Sci. Eng. A 258 84 | | [4] | Tortorelli P F and DeVan J H 1992 Mater. Sci. Eng. 153 573 | | [5] | Charlot F, Gaffet E, Zeghmati B, Bernard F and Niepce J C 1999 Mater. Sci. & Eng. A 262 279 | | [6] | Pocheć E, Jóźwiak S, Karczewski K and Bojar Z 2011 J. Alloys Compd. 509 1124 | | [7] | Sina H, Corneliusson J, Turba K and Iyengar S 2015 J. Alloys Compd. 636 261 | | [8] | Naoi D and Kajihara M 2007 Mater. Sci. Eng. A 459 375 | | [9] | Fang Q F and Jin X J 2014 Basic Principle and Application of Internal Friction and Mechanical Spectrum (Shanghai: Shanghai Jiaotong University Press) (in Chinese) | | [10] | Han F S, Zhu Z G and Gao J C 1999 Metall. Mater. Trans. A 30 771 | | [11] | Hao G L, Xu Q P, Li X Y and Wang W G 2019 Acta Phys. Sin. 68 126101 | | [12] | Hao G L, Wang X F and Li X Y 2015 Chin. Phys. Lett. 32 026103 | | [13] | Gao H Y, He Y H, Shen P Z, Zou J, Xu N P, Jiang Y, Huang B Y and Liu C T 2009 Intermetallics 17 1041 | | [14] | Liu Y N, Sun Z, Cai X P, Jiao X Y and Feng P Z 2018 Trans. Nonferrous Met. Soc. Chin. 28 1141 |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
