Chin. Phys. Lett.  2012, Vol. 29 Issue (1): 010701    DOI: 10.1088/0256-307X/29/1/010701
GENERAL |
Torsional Vibrations of a Cantilever with Lateral Friction in a Resonance Friction Microscope
CHEN Jian-Song1, GE Yun2**, ZHANG Hui3**
1School of Mechanical Engineering, Southeast University, Nanjing 211189
2School of Electronics Science and Engineering, Nanjing University, Nanjing 210093
3Laboratory of Modern Acoustics, Institute of Acoustics, Nanjing University, Nanjing 210093
Cite this article:   
CHEN Jian-Song, GE Yun, ZHANG Hui 2012 Chin. Phys. Lett. 29 010701
Download: PDF(832KB)  
Export: BibTeX | EndNote | Reference Manager | ProCite | RefWorks
Abstract A model of fundamental torsional vibration of a cantilever with lateral friction is presented by using the harmonic balance method. The model demonstrates that the torsional vibration has close relations with the lateral friction threshold, the lateral contact stiffness and the torsional vibration amplitude of the cantilever. When the threshold is larger than a product of the stiffness and the vibration amplitude, the lateral friction is a linear force with the amplitude. If the lateral friction threshold is less than the product, the motions of the tip on the sample can be stick-slip or slip motions. The results are useful to optimize and to manipulate the fundamental flexural vibration of the piezo-cantilever, and give an insight into the tribological characterization of the interface in a resonance friction microscope.
Keywords: 07.79.Sp      81.40.Pq      46.55.+d     
Received: 04 March 2011      Published: 07 February 2012
PACS:  07.79.Sp (Friction force microscopes)  
  81.40.Pq (Friction, lubrication, and wear)  
  46.55.+d (Tribology and mechanical contacts)  
TRENDMD:   
URL:  
https://cpl.iphy.ac.cn/10.1088/0256-307X/29/1/010701       OR      https://cpl.iphy.ac.cn/Y2012/V29/I1/010701
Service
E-mail this article
E-mail Alert
RSS
Articles by authors
CHEN Jian-Song
GE Yun
ZHANG Hui
[1]  Gnecco E, Bennewitz R and Meyer E 2002 Phys. Rev. Lett. 88 215501 
[2]  Yurtsever A, Gigler A M, Macias E and Stark R W 2007 Appl. Phys. Lett. 91 253120 
[3]  Zou Y, Cai J, Wan M Z, Lv P and Guan Q F 2011 Chin. Phys. Lett. 28 116102 
[4]  Reinstadtler M, Rabe U, Scherer V, Hartmann U, Goldade A, Bhushan B and Arnold W 2003 Appl. Phys. Lett. 82 2604 
[5]  Kryov S Y, Dijksman J A, Van Loo W A and Frenken J W 2006 Phys. Rev. Lett. 97 166103 
[6]  Li Y and Qian J Q 2009 Chin. Phys. Lett. 26 100703 
[7]  Yamanaka K and Nakano S 1998 Appl. Phys. A 66 S313 
[8]  Reinstadtler M, Rabe U, Goldade A, Bhushan B and Arnold W 2005 Tribology Int. 38 533 
[9]  Zhang H, Zhang S Y, Chen Z J and Fan L 2010 IEEE Trans. Ultrason. Ferroelect. Freq. Control. 57 1140 
[10]  Yang B D, Chu M L and Meng C H 1998 J. Sound Vibration 210 461 
Related articles from Frontiers Journals
[1] CHEN Shao-Hua, CHEN Pei-Jian. Nanoadhesion of a Power-Law Graded Elastic Material[J]. Chin. Phys. Lett., 2010, 27(10): 010701
[2] LIU Yuan-Fu, CHEN De-Qiang, HAN Jian-Min, WU Hao, XU Xiang-Yang, YANG Si-Ze. Microstructure and Properties of Cr3Si/γ-Fe Composite Coating Prepared by Plasma Transferred Arc Cladding Technique[J]. Chin. Phys. Lett., 2009, 26(9): 010701
[3] CHEN Shao-Hua, PENG Zhi-Long. An Extension of the Two-Dimensional JKR Theory to the Case with a Large Contact Width[J]. Chin. Phys. Lett., 2009, 26(12): 010701
[4] CHEN Shao-Hua, MI Chun-Hui. Friction Properties of Bio-mimetic Nano-fibrillar Arrays[J]. Chin. Phys. Lett., 2009, 26(10): 010701
[5] LIU Yuan-Fu, DENG Fu-Ping, HAN Jian-Min, XU Xiang-Yang, YANG Si-Ze, LIU Xiu-Bo. (Ti,Al)N Film on Normalized T8 Carbon Tool Steel Prepared by Pulsed High Energy Density Plasma Technique[J]. Chin. Phys. Lett., 2007, 24(12): 010701
[6] LIU Yuan-Fu, HAN Jian-Min, ZHANG Gu-Ling, WANG Jiu-Li, YANG Si-Ze. Microstructure and Wear Behaviour of WC Film Prepared by Pulsed High Energy Density Plasma[J]. Chin. Phys. Lett., 2005, 22(12): 010701
Viewed
Full text


Abstract