| Original Articles |
|
|
|
|
Fabrication of High Quality Three-Dimensional Photonic Crystals |
| HU Xiao-Yong1;LIU Yuan-Hao1;CHENG Bing-Ying1;ZHANG Dao-Zhong1;MENG Qing-Bo2 |
| 1Optical Physics Laboratory, Institute of Physics, Chinese Academy of Sciences, Beijing 100080
2State Key Laboratory for Surface Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100080 |
|
| Cite this article: |
|
HU Xiao-Yong, LIU Yuan-Hao, CHENG Bing-Ying et al 2004 Chin. Phys. Lett. 21 1289-1291 |
|
|
|
|
Abstract High quality colloidal photonic crystals made from polystyrene spheres with diameter 240 nm are fabricated by the vertical deposition method. The scanning electron microscopy (SEM) and the transmittance spectrum are used to characterize the properties of the photonic crystal. The SEM images show that there are few lattice defects. The transmittance of the photonic crystal is above 75% in the pass band at 700 nm and is lower than 5% at the centre of the band gap, respectively. It is found that proper concentration is a very important factor to fabricate the photonic crystal when the diameter of the spheres is lower than 300 nm.
|
| Keywords:
42.70.Qs
61.46.+w
81.15.-z
|
|
|
Published: 01 July 2004
|
|
| PACS: |
42.70.Qs
|
(Photonic bandgap materials)
|
| |
61.46.+w
|
|
| |
81.15.-z
|
(Methods of deposition of films and coatings; film growth and epitaxy)
|
|
|
|
|
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
