Original Articles |
|
|
|
|
Enhancement of Gain in L-Band Bismuth-Based Erbium-Doped Fibre Amplifier Using an Un-pumped EDF and Midway Isolator |
W. Y. Chong1; S. W. Harun2;H. Ahmad1 |
1Photonics Laboratory, Department of Physics, University of Malaya, 50603 Kuala Lumpur
2Faculty of Engineering, Multimedia University, Jalan Multimedia 63100 Cyberjaya, Selangor Malaysia |
|
Cite this article: |
W. Y. Chong, S. W. Harun, H. Ahmad 2004 Chin. Phys. Lett. 21 2452-2453 |
|
|
Abstract A hybrid L-band erbium-doped fibre amplifier (EDFA) with enhanced gain characteristic is demonstrated without a significant noise figure penalty. It uses a backward C-band amplified stimulated emission from both the ends of a bismuth-based EDFA system to pump an unpumped erbium-doped fibre (EDF) for gain enhancing. The maximum gain enhancement of 4.0dB is obtained at wavelength 1604nm with EDF length of 20m. The gain spectrum is reasonably flat in this amplifier compared with the amplifier without an EDF. The gain varies from 27.4dB to 30.2dB at wavelength region 1564--1608nm with incorporation of 20m EDF. Noise figure also varies from 6.0 to 7.7dB at this wavelength region.
|
Keywords:
42.81.Qb
42.60.Da
42.65.Yj
|
|
Published: 01 December 2004
|
|
PACS: |
42.81.Qb
|
(Fiber waveguides, couplers, and arrays)
|
|
42.60.Da
|
(Resonators, cavities, amplifiers, arrays, and rings)
|
|
42.65.Yj
|
(Optical parametric oscillators and amplifiers)
|
|
|
|
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|