Original Articles |
|
|
|
|
Influence of Channel Power and Pumping Configuration on the Gain Profile of Distributed Raman Fiber Amplifier |
XIN Xiang-Jun1;YU Chong-Xiu1;ZHANG Ru3;REN Jian-Hua1;LI An-Jian1;WU Qiang1;XIN Yu1;WANG Chuan-Lin1;ZHENG Wen-Xiao1;RUAN Shuang-Chen2;DU Ge-Guo2;XIN Gang4;YANG Xiao-Qiang4 |
1School of Electronical Engineering, Beijing University of Posts and Telecommunications, Beijing 100876
2College of Engineering and Technology, Shenzhen University, Shenzhen 518060
3School of Sciences, Beijing University of Posts and Telecommunications, Beijing 100876
4Beijing Shunlian Software Science and Technology Ltd, Beijing 100876 |
|
Cite this article: |
XIN Xiang-Jun, YU Chong-Xiu, ZHANG Ru et al 2003 Chin. Phys. Lett. 20 237-239 |
|
|
Abstract The influence of channel power and pumping configuration on the gain profile of a distributed Raman fiber amplifier has been experimentally measured. The experimental results show that the influence is significant and should be considered during the gain flatness optimization of the distributed Raman fiber amplifier.
|
Keywords:
42.60.Da
42.65.Dr
42.55.Ye
42.65.Yj
|
|
Published: 01 February 2003
|
|
PACS: |
42.60.Da
|
(Resonators, cavities, amplifiers, arrays, and rings)
|
|
42.65.Dr
|
(Stimulated Raman scattering; CARS)
|
|
42.55.Ye
|
(Raman lasers)
|
|
42.65.Yj
|
(Optical parametric oscillators and amplifiers)
|
|
|
|
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|