| Original Articles |
|
|
|
|
Design and Fabrication of Broad Angular Response Supermirror for Hard X-Ray Optics |
| ZHANG Zhong;WANG Zhan-Shan;WANG Feng-Li;WU Wen-Juan;WANG Hong-Chang;QIN Shu-Ji;CHEN Ling-Yan |
| Institute of Precision Optical Engineering, Department Of Physics, Tongji University, Shanghai 200092 |
|
| Cite this article: |
|
ZHANG Zhong, WANG Zhan-Shan, WANG Feng-Li et al 2005 Chin. Phys. Lett. 22 2511-2151 |
|
|
|
Abstract A broad angular response supermirror is designed by the simplex optimization method and fabricated by dc magnetron sputtering. The negative effect of the interfacial imperfection, mainly consulting from interface roughness and diffusion, is emerged in the calculation of the precise performance of the supermirror. The reflectivity of such a supermirror is measured by the x-ray diffraction instrument (XRD) at Cu Kα line (λ=0.154nm). The experimental reflectivity is about 30% in a fixed broad grazing incident angular range (0.55°--0.85°). The fitting data prove that the thickness of each layer, which is larger than the prospect 0.5nm, is different from the designed one and the roughness in the supermirror is about 0.85nm.
|
| Keywords:
07.60.Hv
07.85.Fv
|
|
|
Published: 01 October 2005
|
|
| PACS: |
07.60.Hv
|
(Refractometers and reflectometers)
|
| |
07.85.Fv
|
(X- and γ-ray sources, mirrors, gratings, and detectors)
|
|
|
|
|
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
