| NUCLEAR PHYSICS |
|
|
|
|
Development of Vertical Buffered Electropolishing for Its Post-Treatment Technology on 1.5 GHz Niobium SRF Cavities |
| JIN Song1,2, A. T. Wu2**, LU Xiang-Yang1, R. A. Rimmer2, LIN Lin1, ZHAO Kui1
|
1State Key Laboratory of Nuclear Physics and Technology, Institute of Heavy Ion Physics, School of Physics, Peking University, Beijing 100871
2Thomas Jefferson National Accelerator Facility, 12000 Jefferson Avenue, Newport News, VA 23606, USA
|
|
| Cite this article: |
|
JIN Song, A. T. Wu, LU Xiang-Yang et al 2011 Chin. Phys. Lett. 28 112901 |
|
|
|
|
Abstract We report the latest research development of vertical buffered electropolishing on its post-treatment procedure as well as the effects of several major post-treatment techniques for buffered electropolishing (BEP) processed 1.5 GHz niobium (Nb) superconducting radio frequency (SRF) cavities. With the established post-treatment procedure, an accelerating gradient of 28.4 MV/m is obtained on a single cell cavity of the cebaf shape. This is the best result in the history of BEP development. The cavity is limited by quench with a high quality factor over 1.2×1010 at the quench point. Analyses from optical inspection and temperature-mapping show that the quench should be originated from the pits that were already present on the cavity before this BEP treatment. All of these factors indicate that this procedure will have a great potential to produce better results if cavities without intrinsic performance limiting imperfections are used.
|
| Keywords:
29.20.Ej
|
|
|
Received: 28 July 2011
Published: 30 October 2011
|
|
|
|
|
|
|
|
[1] Padamsee H et al 1998 RF-Superconductivity for Accelerators (New York: John Wiley &Sons) p 120
[2] Saito K et al 1997 Proceedings of the 8th Workshop on RF Superconductivity, SRF1997 (Abano Terme (Padova), Italy, 6–10 October 1997) p 795
[3] Kako E et al 1999 Proceedings of PAC99 (New York, 29 March–2 April 1999) p 423
[4] Lilje L 2001 Proceedings of the 10th Workshop on RF Superconductivity, SRF2001 (Tsukuba, Ibaraki, Japan, 6–11 September 2001) MA009
[5] Kneisel P 2001 Is there an alternative to the present upgrade scenario (Jefferson Lab Technical Note) JLAB-TN-01-013
[6] ILC Global Design Effort and World Wide Study, International Linear Collider Reference Design Report http://ilcdoc.linearcollider.org/record/6321/files/ILC_RDR_Volume_3-Accelerator.pdf
[7] Ginsburg C M http://ilcagenda.linearcollider.org/conferenceDisplay.py?confId=1855
[8] Wu A T et al 2007 Appl. Surf. Sci. 253 3041
[9] Delayen J R et al 2001 Proceedings of the 10th Workshop on RF Superconductivity, SRF2001 (Tsukuba, Ibaraki, Japan, 6–11 September 2001) p 499
[10] Wu A T 2003 Proceedings of the 11th Workshop on RF Superconductivity, SRF2003 (Lubeck/Travemunde, Germany, 8–12 September 2003) ThP13
[11] Jin S, Lu X Y et al 2010 Phys. Rev. ST Accel. Beams 13 061001
[12] Wang Erdong et al 2007 Proceedings of the 13th workshop on SRF, SRF2007 (Beijing, China, 14–19 October 2007) WEP65
[13] Wu A T et al 2010 Proceedings of IPAC10 (Kyoto, Japan, 23–28 May 2010) WEPEC080
[14] Wu A T et al 2010 Proceedings of IPAC10 (Kyoto, Japan, 23–28 May 2010) WEPEC081
[15] Éozénou F et al 2009 Proceedings of the 14th Workshop on SRF, SRF2009 (Berlin, Germany, 20–25 September 2009) THPPO068
[16] Jin Song et al 2009 Proceedings of the 14th Workshop on SRF, SRF2009 (Berlin, Germany, 20–25 September 2009) THPPO097
[17] Wu A T et al 2009 Proceedings of PAC09 (Vancouver, BC, Canada, 4–8 May 2009) WE5PFP060
[18] Jin Song et al 2007 Proceedings of the 13th workshop on S.RF (Beijing, China, 14–19 October 2007) WEP86
[19] Jin S, Wu A T et al 2011 Appl. Surf. Sci. (to be published)
[20] Padamsee H et al 2008 RF-Superconductivity for Accelerators, Science, Technology and Application (New York: John Wiley & Sons) p 237
[21] Mammosser J 2007 ILC cavity qualification (Americas, TTC meeting at FNAL, 23–26 April 2007)
[22] Geng L R et al 2007 Proceedings of the 13th workshop on SRF, SRF2007 (Beijing, China, 14–19 October 2007) WEP28
[23] Reece C E et al 2009 Proceedings of the 14th Workshop on SRF, SRF2009 (Berlin, Germany, 20–25 September 2009) THPPO0862
[24] Saeki T et al 2009 Proceedings of PAC09 (Vancouver, BC, Canada, PAC09, 4–8 May 2009) TU5PFP072
[25] Ciovati G et al 2010 Phys. Rev. ST Accel. Beams 13 022002
[26] Saeki T et al 2009 Proceedings of the 14th Workshop on SRF, SRF2009 (Berlin, Germany, 20–25 September 2009) THPPO085
[27] TESLA Technology Collaboration Final Surface Preparation for Superconducting Cavities: Attempt to Describe an Optimized Procedure TTC-Report 2008-05 http://flash. desy.de/sites/site_vuvfel/content/e403/e1644/e2271/e2272/infoboxContent2354/TTC-Report2008-05.pdf
[28] Wu A T et al 2009 Proceedings of the 14th Workshop on SRF, SRF2009 (Berlin, Germany, 20–25 September 2009) THPPO064
[29] Smith J F 1983 Bull. Alloy Phase Diagrams 2 39
[30] Bonin B et al 1991 Proceedings of the 5th Workshop on SRF, SRF1991 (Hamburg, Germany, 19–23 August 1991) p 210
[31] Kneisel P et al 1993 Proceedings of the 6th Workshop on SRF, SRF1993 (CEBAF, Newport News, USA, 4–8 October 1993) p 628
[32] Sertore D et al 2007 Proceedings of PAC07, PAC07 (Albuquerque, New Mexico, USA, 25–29 June 2007) WEPMN021
[33] Sertore D et al 2007 Proceedings of the 13th workshop on SRF, SRF2007 (Beijing, China, 14–19 October 2007) WEP66
[34] Visentin B et al 1998 Proceedings of EPAC1998 (Stockholm) vol III p 1885
[35] Visentin B et al 1999 Proceedings of 9th workshop on RF Superconductivity, SRF1999 (Santa Fe, USA, 1–5 November 1999) p 198
[36] Lilje L et al 2004 Nucl. Instrum. Methods Phys. Res. A 516 213
[37] Lilje L et al 1999 Proceedings of 9th workshop on RF Superconductivity, SRF1999 (Santa Fe, USA, 1–5 November 1999) p 74
[38] Wu A T et al 2011 Proceedings of IPAC2011, IPAC2011 (San Sebastian, Spain, 4–9 September 2011) MOPC119
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
