| Original Articles |
|
|
|
|
Anomalous Diffusion of Mo Implanted into Aluminium |
| ZHANG Tong-He;WU Yu-Guang;DENG Zhi-Wei;QIAN Wei-Dong |
| Key Laboratory in University for Radiation Beam Technology &
Material Modification, and Institute of Low Energy Nuclear Physics, Beijing Normal University, and Beijing Radiation Center, Beijing 100875. |
|
| Cite this article: |
|
ZHANG Tong-He, WU Yu-Guang, DENG Zhi-Wei et al 2001 Chin. Phys. Lett. 18 77-79 |
|
|
|
Abstract Mo ions are implanted into aluminium with a high ion flux and high dose at elevated temperatures of 300°C, 400°C and 500°C. X-ray diffraction spectra show that the Al12Mo phases are formed. Rutherford backscattering spectroscopy indicates that a profile of Mo appears in Al around the depth of 550nm and with an atomic concentration of ～7%, when Mo is implanted to the dose of 3×1017/cm2 with an ion flux of 45μA/cm2(400°C). If the dose increases to 1×1018cm2 at the same ion flux, the penetration of Mo ions in Al can reach a depth of 2μm, which is greater than the ion project range Rp(52.5nm). The results show that anomalous diffusion takes place. Owing to the intense atom collision cascades, the diffusion coefficient increases greatly with the increase of the ion flux and dose. The Mo diffusion coefficients in Al are calculated. The Mo retained dose in Al increases obviously with the increase of the ion flux.
|
| Keywords:
61.10.-i
61.72.Ww
66.30.-h
68.55.Ln
|
|
|
Published: 01 January 2001
|
|
|
|
|
|
|
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
