摘要The constitutive relation of single crystal copper based on atomistic potential is implemented to capture the nonlinear inter-atomic interactions. Uniaxial loading tests of single crystal copper with inter-atomic potential finite-element model are carried out to determine the corresponding ideal strength using the modified Born stability criteria. Dependence of the ideal strength on the crystallographic orientation is studied, and tension-compression asymmetry in ideal strength is also investigated. The results suggest that asymmetry for yielding strength of nano-materials may result from anisotropic character of crystal instability. Moreover, the results also reveal that the critical resolved shear stress in the direction of slip is not an accurate criterion for the ideal strength since it could not capture the dependence on the loading conditions and hydrostatic stress components for the ideal strength.
Abstract:The constitutive relation of single crystal copper based on atomistic potential is implemented to capture the nonlinear inter-atomic interactions. Uniaxial loading tests of single crystal copper with inter-atomic potential finite-element model are carried out to determine the corresponding ideal strength using the modified Born stability criteria. Dependence of the ideal strength on the crystallographic orientation is studied, and tension-compression asymmetry in ideal strength is also investigated. The results suggest that asymmetry for yielding strength of nano-materials may result from anisotropic character of crystal instability. Moreover, the results also reveal that the critical resolved shear stress in the direction of slip is not an accurate criterion for the ideal strength since it could not capture the dependence on the loading conditions and hydrostatic stress components for the ideal strength.
LIU Xiao-Ming;LIU Zhan-Li;YOU Xiao-Chuan;NIE Jun-Feng;ZHUANG Zhuo. Theoretical Strength of Face-Centred-Cubic Single Crystal Copper Based on a Continuum Model[J]. 中国物理快报, 2009, 26(2): 26103-206103.
LIU Xiao-Ming, LIU Zhan-Li, YOU Xiao-Chuan, NIE Jun-Feng, ZHUANG Zhuo. Theoretical Strength of Face-Centred-Cubic Single Crystal Copper Based on a Continuum Model. Chin. Phys. Lett., 2009, 26(2): 26103-206103.
[1] Shan Z W, Mishra R K, Syed Asif S A, Warren O L and MinorA M 2008 Nature Mater. 7 115 [2] Uchic M D, Dimiduk D M, Florando J N and Nix W D 2004 Science 305 986 [3] Wang W, Lu K 2006 Philos. Mag. 86 5309 [4] Bei H, Gao Y F, Shim S, George E P and Pharr G M 2008 Phys. Rev. B 77 60103 [5] Li J, Van Vliet K J, Zhu T, Yip S and Suresh S 2002 Nature 418 307-310 [6] Ogata S, Li J and Yip S 2002 Science 298 807 [7] Wang S Q, Ye H Q and Yip S 2006 J. Phys.: Condens.Matter 18 395 [8] Cerny M, Pokluda J 2007 Phys. Rev. B 76 024115 [9] Zhu T, Li J, J. Van Vliet K, Ogata S, Yip S and Suresh S2004 J. Mech. Phys. Solids 52 691 [10] Li W and Wang T 1998 J. Phys: Condens. Matter 10 9889 [11] Zhang J M, Yang Y, Xu K W and Ji V 2008 Comput.Mater. Sci. 43 917 [12] Marszalek P E, Greenleaf W J, Li H, Oberhauser A F andFernandez J M 2000 Proc. Natl. Acad. Sci. U.S.A. 976282 [13] Diao J K, Gall K and Dunn M L 2004 Nano Lett 4 1863 [14] Lin Y and Pen D 2007 Nanotechnology 18 395705 [15] Park H S and Klein P A 2007 Phys. Rev. B 7585408 [16] Liu X H, Gu J F, Shen Y and Chen C F 2008 ScriptaMaterialia 58 564 [17] Tadmor E B, Ortiz M and Phillips R 1996 Philos.Mag. A 73 1529 [18] Shenoy V B, Miller R, Tadmor E, Rodney D, Phillips R andOrtiz M 1999 J. Mech. Phys. Solids 47 611 [19] Abraham F F and Gao H 2000 Phys. Rev. Lett. 84 3113 [20] Arroyo M and Belytschko T 2002 J. Mech. Phys.Solids 50 1941 [21] Zhang P, Huang Y, Geubelle P H, Klein P A and Hwang K C2002 Int. J. Solids Struct. 39 3893 [22] Wu J, Hwang K C and Huang Y 2008 J. Mech. Phys.Solids 56 279 [23] Born M and Huang K 1956 Dynamical Theory of CrystalLattices. (Oxford: Clarendon) [24] Wang J, Yip S, Phillpot S R and Wolf D 1993 Phys.Rev. Lett. 71 4182 [25] Mishin Y, Mehl M J, Papaconstantopoulos D A, Voter A Fand Kress J D 2001 Phys. Rev. B 63 224106 [26] Cerny M, Sob M, Pokluda J and Sandera P 2004 J.Phys.: Condens. Matter 16 1045 [27] Tschopp M A and McDowell D L 2007 Appl. Phys. Lett. 90 121916 [28] Tschopp M A and McDowell D L 2008 J. Mech. Phys.Solids 56 1806 [29] Park H S, Gall K and Zimmerman J A 2005 Phys. Rev.Lett. 95 255504 [30] Zhu T, Li J, Samanta A, Leach A and Gall K 2008 Phys. Rev. Lett. 100 25502 [31] Tschopp M A, Spearot D E and McDowell D L 2007 Modelling and Simulation in Materials Science and Engineering 15 693