Measurement of Electrical Conductivity of Porous Titanium and Ti6Al4V Prepared by the Powder Metallurgy Method
ZHU Ke1, LI Cheng-Feng1,2, ZHU Zhen-Gang1
1Key Laboratory of Materials Physics, Institute of Solid State Physics, Chinese Academy of Sciences, PO Box 1129, Hefei 230031
2School of Materials Science and Engineering, Shandong University of Technology, Zibo 255049
Measurement of Electrical Conductivity of Porous Titanium and Ti6Al4V Prepared by the Powder Metallurgy Method
ZHU Ke1;LI Cheng-Feng1,2;ZHU Zhen-Gang1
1Key Laboratory of Materials Physics, Institute of Solid State Physics, Chinese Academy of Sciences, PO Box 1129, Hefei 230031
2School of Materials Science and Engineering, Shandong University of Technology, Zibo 255049
Abstract： Porous titanium and Ti6Al4V are produced by the powder metallurgy method. Dependence of the electrical conductivity on the porosity and pore size is investigated and the experimental results are correlative and compared with several earlier models. A newly modified Mori--Tanaka relationship based on the effective field method is proposed, which is successfully applied to describe the dependence of the electrical conductivity of porous titanium and Ti6Al4V on the porosity. The pore size has a minor effect on the electrical onductivity of both samples.
(Powder processing: powder metallurgy, compaction, sintering, mechanical alloying, and granulation)
引用本文:
ZHU Ke;LI Cheng-Feng;ZHU Zhen-Gang. Measurement of Electrical Conductivity of Porous Titanium and Ti6Al4V Prepared by the Powder Metallurgy Method[J]. 中国物理快报, 2007, 24(1): 187-190.
ZHU Ke, LI Cheng-Feng, ZHU Zhen-Gang. Measurement of Electrical Conductivity of Porous Titanium and Ti6Al4V Prepared by the Powder Metallurgy Method. Chin. Phys. Lett., 2007, 24(1): 187-190.
2007, Vol. 24 
