摘要The thrust vectoring ability of a continuous rotating detonation engine is numerically investigated, which is realized via increasing local injection stagnation pressure of half of the simulation domain compared to the other half. Under the homogeneous injection condition, both the flow-field structure and the detonation wave propagation process are analyzed. Due to the same injection condition along the inlet boundary, the outlines of fresh gas zones at different moments are similar to each other. The main flow-field features under thrust vectoring cases are similar to that under the baseline condition. However, due to the heterogeneous injection system, both the height of the fresh gas zone and the pressure value of the fresh gas in the high injection pressure zone are larger than that in the low injection pressure zone. Thus the average pressure in half of the engine is larger than that in the other half and the thrust vectoring adjustment is realized.
Abstract：The thrust vectoring ability of a continuous rotating detonation engine is numerically investigated, which is realized via increasing local injection stagnation pressure of half of the simulation domain compared to the other half. Under the homogeneous injection condition, both the flow-field structure and the detonation wave propagation process are analyzed. Due to the same injection condition along the inlet boundary, the outlines of fresh gas zones at different moments are similar to each other. The main flow-field features under thrust vectoring cases are similar to that under the baseline condition. However, due to the heterogeneous injection system, both the height of the fresh gas zone and the pressure value of the fresh gas in the high injection pressure zone are larger than that in the low injection pressure zone. Thus the average pressure in half of the engine is larger than that in the other half and the thrust vectoring adjustment is realized.
LIU Shi-Jie**;LIN Zhi-Yong;SUN Ming-Bo;LIU Wei-Dong
. Thrust Vectoring of a Continuous Rotating Detonation Engine by Changing the Local Injection Pressure[J]. 中国物理快报, 2011, 28(9): 94704-094704.
LIU Shi-Jie**, LIN Zhi-Yong, SUN Ming-Bo, LIU Wei-Dong
. Thrust Vectoring of a Continuous Rotating Detonation Engine by Changing the Local Injection Pressure. Chin. Phys. Lett., 2011, 28(9): 94704-094704.
[1] Voitsekhovskii B V 1959 Dok. Akad. Nauk SSSR [ Sov. Phys. Dokl. ] 129 1254
[2] Nicholls J A 1966 J. Spacecraft Rockets 3 893
[3] Bykovskii F A et al 1980 Combust. Expl. Shock Waves 16 570
[4] Bykovskii F A et al 2006 J. Propul. Power 22 1204
[5] Falempin F et al 2008 AIAA Paper 2008-2679
[6] Kindracki J et al 2011 Shock Waves 21 75
[7] Braun E M et al 2010 AIAA paper 2010-146
[8] Thomas L M et al 2011 AIAA Paper 2011-602
[9] Zhdan S A et al 2007 Combust. Expl. Shock Waves 43 449
[10] Hishida M et al 2009 Shock Waves 19 1
[11] Liu S J et al 2010 The 7th International Colloquium on Pulsed and Continuous Detonations (St. Petersburg, Russia 4–8 October 2010)
[12] Shao Y T et al 2010 Chin. Phys. Lett. 27 034705
[13] Yi T H et al 2011 J. Propul. Power 27 171
[14] Schwer D A et al 2011 Proc. Combust. Inst. 33 2195
[15] Ma F H et al 2006 J. Propul. Power 22 1188
[16] Dabora E K et al 1965 Tenth Symposium (International) on Combustion p 817
2011, Vol. 28 
