摘要Nickel ferrite nanoparicles with various grain sizes are synthesized using annealing treatment followed by ball milling of its bulk component materials. Commercially available nickel and iron oxide powders are first mixed, and then annealed at 1100°C in an oxygen environment furnace and for 3 h. The samples are then milled for different times in an SPEX mill. X-ray diffraction pattern indicates that in this stage the sample is single phase. The average grain size is estimated by scanning electron microscopy (SEM) and x-ray diffraction techniques. Magnetic behavior of the sample at room temperature is studied using a superconducting quantum interference device (SQUID). The Curie temperature of the powders is measured by an LCR–meter unit. The x-ray diffraction patterns clearly indicate that increasing the milling time leads to a decrease in the grain size and consequently leads to a decrease in the saturation magnetization as well as the Curie temperatures. This result is attributed to the spin-glass-like surface layer on the nanocrystalline nickel ferrite with a ferrimagnetically aligned core.
Abstract：Nickel ferrite nanoparicles with various grain sizes are synthesized using annealing treatment followed by ball milling of its bulk component materials. Commercially available nickel and iron oxide powders are first mixed, and then annealed at 1100°C in an oxygen environment furnace and for 3 h. The samples are then milled for different times in an SPEX mill. X-ray diffraction pattern indicates that in this stage the sample is single phase. The average grain size is estimated by scanning electron microscopy (SEM) and x-ray diffraction techniques. Magnetic behavior of the sample at room temperature is studied using a superconducting quantum interference device (SQUID). The Curie temperature of the powders is measured by an LCR–meter unit. The x-ray diffraction patterns clearly indicate that increasing the milling time leads to a decrease in the grain size and consequently leads to a decrease in the saturation magnetization as well as the Curie temperatures. This result is attributed to the spin-glass-like surface layer on the nanocrystalline nickel ferrite with a ferrimagnetically aligned core.
(Diamagnetism, paramagnetism, and superparamagnetism)
引用本文:
G. Nabiyouni**;M. Jafari Fesharaki;M. Mozafari;J. Amighian
. Characterization and Magnetic Properties of Nickel Ferrite Nanoparticles Prepared by Ball Milling Technique[J]. 中国物理快报, 2010, 27(12): 126401-126401.
G. Nabiyouni**, M. Jafari Fesharaki, M. Mozafari, J. Amighian
. Characterization and Magnetic Properties of Nickel Ferrite Nanoparticles Prepared by Ball Milling Technique. Chin. Phys. Lett., 2010, 27(12): 126401-126401.
[1] Nathani H and Gubbala S 2004 J. Mater. Sci. Engin. B 111 95
[2] Young-Yeal Song N Mo and Patton C E 2005 J. Appl. Phys. 97 093901
[3] Lee S, Drwiega J, Mazysk D, Wu Ch and Sigmund W M 2006 J. Mater. Chem. Phys. 96 2
[4] Gabal M A and Alangari Y M 2009 J. Mater. Chem. Phys. 115 578
[5] Satyanarayana L and Madhusudan Reddy K 2003 J. Mater. Chem. Phys. 82 21
[6] Wheicheng W, Shuo L and Yiyun W 2008 J. Mater. Sci. Technol. 24 1761
[7] Cullity B D 1956 Elements of X-Ray Diffraction (New York: Addison-Wesley) chap 7 p 139
[8] Singh J, Barthwal S K and Chandra K 2005 J. Solid State Chem. 178 3183
[9] Reitz J R, Fredrick J M and Robert W Ch 1979 Foundations of Electromagnetic Theory (Cambridge: Addison-Wesley) chap 11 p 306
[10] Morrish A H 1965 The Physical Principles of Magnetism (New York: JohnWiley and Sons) chap 6 p 264
[11] Goldman A 2006 Modern Ferrites Technology (New York: Springer) chap 2 p 32
[12] Muroi M, McCormick P G and Street R 2000 J. Solid State Chem. 152 503
[13] Misra R D K, Gubbala S, Kale A 2004 J. Mater. Sci. Technol. 111 164
[14] Caizer C and Stefanescu M 2002 J. Phys. D: Appl. Phys. 35 3035
2010, Vol. 27 
