摘要A modified Lattice-Boltzmann method is proposed by considering the Klinkenberg effect and adsorbability-desorbability for the purpose of simulating methane gas seepage in fissured coal. The results show that the Klinkenberg effect has a little influence on methane gas seepage in fissured coal, so it can be neglected in engineering computations for simplicity. If both the Klinkenberg effect and the adsorbability-desorbability are considered, the Klinkenberg influence on gas pressure decreases as the Darcy coefficient increases. It is found by gas drainage simulations that near a drainage hole, the effect of adsorption and desorption cannot be neglected, and the location of the drainage hole has a great influence on drainage efficient λ when the hole is just located at the mid-zone of the coal seam, λ is 0.691808; when the hole is excursion down to 1.0m from the mid-zone of coal seam, λ decreases to 0.668631; when the hole is excursion up or down to 2.0m from the mid-zone of coal seam, λ decreases to 0.632917. The simulations supply an effective approach for optimizing the gas drainage hole location.
Abstract：A modified Lattice-Boltzmann method is proposed by considering the Klinkenberg effect and adsorbability-desorbability for the purpose of simulating methane gas seepage in fissured coal. The results show that the Klinkenberg effect has a little influence on methane gas seepage in fissured coal, so it can be neglected in engineering computations for simplicity. If both the Klinkenberg effect and the adsorbability-desorbability are considered, the Klinkenberg influence on gas pressure decreases as the Darcy coefficient increases. It is found by gas drainage simulations that near a drainage hole, the effect of adsorption and desorption cannot be neglected, and the location of the drainage hole has a great influence on drainage efficient λ when the hole is just located at the mid-zone of the coal seam, λ is 0.691808; when the hole is excursion down to 1.0m from the mid-zone of coal seam, λ decreases to 0.668631; when the hole is excursion up or down to 2.0m from the mid-zone of coal seam, λ decreases to 0.632917. The simulations supply an effective approach for optimizing the gas drainage hole location.
(Computational methods in statistical physics and nonlinear dynamics)
引用本文:
TAN Yun-Liang;TENG Gui-Rong;ZHANG Ze. A Modified LBM Model for Simulating Gas Seepage in Fissured Coal Considering Klinkenberg Effects and Adsorbability-Desorbability[J]. 中国物理快报, 2010, 27(1): 14701-014701.
TAN Yun-Liang, TENG Gui-Rong, ZHANG Ze. A Modified LBM Model for Simulating Gas Seepage in Fissured Coal Considering Klinkenberg Effects and Adsorbability-Desorbability. Chin. Phys. Lett., 2010, 27(1): 14701-014701.
[1] Klusman R W 2006 USA Appl. Geochem. 21 1498 [2] Brown A 2000 AAPG Bull. 84 1775 [3] Zhang L H, Zhang J L and Xu B Q 2007 Chin. J. Comput.Phys. 24 90 (in Chinese) [4] Vaziri H H et al 2002 J. Petroleum Sci. Engin. 36 71 [5] Xiao X C, Pan Y S 2007 Chin. J. Rock Mech. Engin. 26 977 (in Chinese) [6] Chen H et al 1992 Phys. Rev. A 45 5339 [7] Qian Y H et al 1992 Europhys. Lett. 17 479 [8] Chen S et al 1998 Annu. Rev. Fluid Mech. 30329 [9] Inamuro T 2006 Fluid Dyn. Res. 38 641 [10] Basagaoglu H et al 2007 Physica A 374 691 [11] Jeong N, Lin C L and Hyung C D 2006 J. Micromech.Microengin. 16 1749 [12] Tang J P et al 2006 J. Chin. University MiningTechnol. 35 274 [13] Bhatnagar P et al 1954 Phys. Rev. 94 551 [14] Krajcinovic D 1984 Appl. Mech. Rev. 3 71 [15] Wong T F et al A 2006 Mech. Mater. 38 664 [16] Wu Y S et al 1998 Transport in Porous Media 32 117 [17] Chen D X 2002 Acta Mech. Sin. 34 96 (inChinese) [18] Liu J J, Liu X G and Hu Y R 2003 Chin. J. RockMech. Engin. 22 556 (in Chinese) [19] Seta T et al 2006 Math. Comput. Simul. 72 195 [20] Shan X and Chen H 1993 Phys. Rev. E 47 1815 [21] Huang H B et al 2009 Int. J. Numer. Meth. Fluids 61 341 [22] Ergun S 1952 Chem. Eng. Prog. 48 89 [23] Vafai K 1984 J. Fluid Mech. 147 233 [24] Klinkenberg L J 1941 American Petroleum Institutep 200 [25] Jones F O and Owens W W 1980 J. Pet. Tech. 32 1631 [26] Zhu W C et al 2007 Int. J. Rock Mech. Mining Sci. 44 971 [27] Ji Y P et al 2009 Chin. Phys. Lett. 26074702 [28] Cai J and Huai X L 2009 Chin. Phys. Lett. 26064401 [29] Wu J S et al 2009 Chin. Phys. Lett. 26064701 [30] Xia Y et al 2009 Chin. Phys. Lett. 26 034702
2010, Vol. 27 
