Design and Parameter Analysis for Explosive-Driven Demagnetization Pulsed Power Source
SHI Shang-Chun, MENG Chuan-Min, HE Hong-Liang, DONG Shi, ZHAO Feng
Laboratory for Shock Wave and Detonation Physics Research, Institute of Fluid Physics, China Academy of Engineering Physics, Mianyang 621900
Design and Parameter Analysis for Explosive-Driven Demagnetization Pulsed Power Source
SHI Shang-Chun;MENG Chuan-Min;HE Hong-Liang;DONG Shi;ZHAO Feng
Laboratory for Shock Wave and Detonation Physics Research, Institute of Fluid Physics, China Academy of Engineering Physics, Mianyang 621900
关键词 ：
62.50.+p ,
75.90.+w
Abstract ： We design a pulsed power source based on the technique for explosive-driven demagnetization. The physical process and geometry structure of this power source are described in detail and several formulae are deduced to predict some important properties of the power source. With a Ф 40mm×20mm×10mm cylindrical magnet, the maximum output voltage and current reaches 125.5V and 862.9A, respectively. The rise time of the front edge of the output voltage is about 264ns. On the 0.05Ω simulative load, the net power is 37kW.
Key words ：
62.50.+p
75.90.+w
出版日期: 2006-02-01
引用本文:
SHI Shang-Chun;MENG Chuan-Min;HE Hong-Liang;DONG Shi;ZHAO Feng. Design and Parameter Analysis for Explosive-Driven Demagnetization Pulsed Power Source[J]. 中国物理快报, 2006, 23(2): 423-425.
链接本文:
https://cpl.iphy.ac.cn/CN/
或
https://cpl.iphy.ac.cn/CN/Y2006/V23/I2/423
[1]
CHEN Hai-Yong;HE Chun-Yuan;GAO Chun-Xiao;ZHANG Jia-Hua;GAO Shi-Yong;LU Hong-Liang;NIE Yan-Guang;LI Dong-Mei;KAN Shi-Hai;ZOU Guang-Tian. Structural Transition of Gd2 O3 :Eu Induced by High Pressure
[2]
ZHANG Ming-Jian;LIU Fu-Sheng;TIAN Chun-Ling;SUN Yan-Yun. Multi-Shock Compression of Dense Hydrogen--Helium Mixture Beyond 100GPa
[3]
WU Da-Jian;WU Xue-Wei;LIU Xiao-Jun. Photoinduced Charge-Ordering Fluctuation in Wide-Bandwidth La0.7 Sr0.3 MnO3 Films
[4]
HU Jian-Bo;YU Yu-Ying;TAN Hua;DAI Cheng-Da. Effect of Anneal on the Release Behaviour of LY12-Al Alloy
[5]
LI Feng-Ying;JIN Chang-Qing;YOU Shu-Jie;XIAO Chang-Jiang;YU Ri-Cheng;WANG Xiao-Hui;LIU Jing;LI Xiao-Dong;LI Yan-Chun;CHEN Liang-Chen. Pressure-Induced Phase Transition in BaTiO3 Nanocrystals
[6]
LI Feng-Ying;JIN Chang-Qing;CHEN Liang-Chen;ZHOU Bo;SHI Li-Chi;LIU Jing;LI Xiao-Dong;LI Yan-Chun;YU Ri-Cheng. Compressibility of Lattice Parameters of Several Layered Compounds
[7]
YANG Liu-Xiang;ZHAO Jing-Geng;YU Yong;LI Feng-Ying;YU Ri-Cheng;JIN Chang-Qing. Metallization of Cu3 N Semiconductor under High Pressure
[8]
ZHANG Li;GONG Zi-Zheng;. Shock Compression and Phase Transitions of Magnesiowüstite (Mg,Fe)O up to Earth’s Lowermost Mantle Conditions
[9]
SONG Zhen-Fei;ZHU Wen-Jun;DENG Xiao-Liang;HE Hong-Liang. Crystal-Orientation Dependent Evolution of Edge Dislocations from a Void in Single Crystal Cu
[10]
FANG Wen-Xiao;HE Zhen-Hui;XU Xue-Qing;SHEN Hui. Aligned Structures of Fe3 O4 Nanoparticles in a Curable Polymer Carrier Induced by a Magnetic Field
[11]
SUN Yu-Huai;HUANG Hai-Jun;LIU Fu-Sheng;YANG Mei-Xia;JING Fu-Qian;. A Direct Comparison between Static and Dynamic Melting Temperature Determinations below 100GPa
[12]
Chen Qi-Feng;CAI Ling-Cang;JING Fu-Qian;CHEN Dong-Quan. Equation of State of the Fluid He--Ne Binary Mixtures at High Pressures and High Temperatures
[13]
YU Yu-Ying;TAN Hua;DAI Cheng-Da;HU Jian-Bo;CHEN Da-Nian. Sound Velocity and Release Behaviour of Shock-Compressed LY12 Al
[14]
ZHAO Jing-Geng;YANG Liu-Xiang;YU Yong;YOU Shu-Jie;YU Ri-Cheng;LI Feng-Ying;CHEN Liang-Chen;JIN Chang-Qing;LI Xiao-Dong;LI Yan-Chun;LIU Jing. Isostructural Phase Transition of TiN under High Pressure
[15]
LIU Fu-Sheng;YANG Mei-Xia;LIU Qi-Wen;CHEN Jun-Xiang;JING Fu-Qian;. Shear Viscosity of Aluminium under Shock Compression
2006, Vol. 23 
