CROSS-DISCIPLINARY PHYSICS AND RELATED AREAS OF SCIENCE AND TECHNOLOGY |
|
|
|
|
Structural Design of a Compact in-Plane Nano-Grating Accelerometer |
YAO Bao-Yin**, ZHOU Zhen, FENG Li-Shuang, WANG Wen-Pu, WANG Xiao |
Key Laboratory of Micro-nano Measurement-manipulation and Physics (Ministry of Education), Beihang University, Beijing 100191 Fundamental of Science on Novel Inertial Instrument & Navigation System Technology Laboratory, Beihang University, Beijing 100191
|
|
Cite this article: |
YAO Bao-Yin, ZHOU Zhen, FENG Li-Shuang et al 2012 Chin. Phys. Lett. 29 118502 |
|
|
Abstract A combination of large mass, weak spring and nano-grating is the key for a nano-grating accelerometer to measure nano-G acceleration. A novel compact nano-grating accelerometer integrating a large mass with nano-grating is proposed. First, the numbers of diffraction orders are calculated. Then, structure parameters are optimized by finite element analysis to achieve a high sensitivity in an ideal vibration mode. Finally, we design the fabrication method to form such a compact nano-grating accelerometer and successfully fabricate the uniform and well-designed nano-gratings with a period of 847 nm, crater of 451 nm by an FIB/SEM dual beam system. Based on the ANSYS simulation, a nano-grating accelerometer is predicted to work in the first modal and enables the accelerometer to have displacement sensitivity at 197 nm/G with a measurement range of ±1 G, corresponding to zeroth diffraction beam optical sensitivity 1%/mG. The nano-gratings fabricated are very close to those designed ones within experimental error to lay the foundation for the sequent fabrication. These results provide a theoretical basis for the design and fabrication of nano-grating accelerometers.
|
|
Received: 09 July 2012
Published: 28 November 2012
|
|
PACS: |
85.85.+j
|
(Micro- and nano-electromechanical systems (MEMS/NEMS) and devices)
|
|
87.85.Qr
|
(Nanotechnologies-design)
|
|
42.79.Dj
|
(Gratings)
|
|
|
|
|
[1] Krishnamoorthy U, Olsson I I I R H, Bogart G R, Baker M S, Carr D W, Swiler T P and Clews P J 2008 Sens. Actuat. A 145 283 [2] Contreras A M, Grunes J Yan X M, Liddle A and Somorjai G A 2005 Catal. Lett. 100 115 [3] Kato F, Fujinawa S Li Y G and Sugiyama S 2007 Microsyst. Technol. 13 221 [4] Fok L M Liu Y H and Li W J 2010 IEEE Trans. Autom. Sci. Eng. 7 49 [5] Dong W Guo X, Wang S Z, Wang Z L and Ming N B 2008 Chin. Phys. Lett. 25 2957 [6] Wu W X, Luo Y H and Cheng X S 2010 Chin. Phys. Lett. 27 094202 [7] Keeler B E N, Carr D W, Sullivan J P, Friedmann T A, Wendt J R and Maxwell J C 2004 Opt. Lett. 29 1182 [8] Carr D W, Sullivan J P and Friedmann T A 2003 Opt. Lett. 28 1636 [9] Carr D W, Bianca E N K, Sullivan J P, Friedmann T A and Wendt J R 2004 MOEMS Miniaturized Syst. IV (Bellingham WA 24–29 January 2004) 5346 56 [10] Moharam M G, Grann E B and Pommet D A 1995 J. Opt. Soc. Am. A 12 1068 [11] Chi W W, Azid A A and Majlis B Y 2010 Arch. Mesh 62 5 405 [12] Chae J S, Kulah H, Salian A and Najafi K 2000 Third Annu. Micro/Nanotechnol. Conf. (Houston Texas 23–28 January 2000) 623 [13] Yao B Y, Luo H, Feng L S, Zhou Z and Wang R M 2011 Key Eng. Mater. 483 66 |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|