Original Articles |
|
|
|
|
Lasing Characteristics of Tm3+:Ho3+ Codoped Silica Fibre Laser Pumped by 1.18-μm Raman Fibre Laser |
DONG Shu-Fu1,2;CHEN Guo-Fu1;WANG Xian-Hua1;ZHAO Shang-Hong2 |
1State Key Laboratory of Transient Optics Technology, Xi’an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi’an 710068
2Telecommunication Engineering Institute, Air Force Engineering University, Xi’an 710077 |
|
Cite this article: |
DONG Shu-Fu, CHEN Guo-Fu, WANG Xian-Hua et al 2004 Chin. Phys. Lett. 21 2179-2181 |
|
|
Abstract The fundamental characteristics of Fabry--Perot-cavity continuous-wave Tm--Ho codoped silica fibre lasers pumped by a 1.18 μm Raman fibre laser are presented. A maximum output power of 930 mW at 1880nm is generated for a fibre length of 1 m from the transition of Tm3+, with a slope efficiency of 32.4%. For a 3-m-long fibre, the maximum output power decreases to 650 mW at 1960 nm due to the laser emission from Ho3+ with a lower slope efficiency of 25%, which clearly shows the effective energy transfer from Tm3+ to Ho3+. The wavelength red-shifting of the laser emission originates from the transition competition and the emission cross section difference between Tm3+ and Ho3+.
|
Keywords:
42.55.Wd
42.60.Da
|
|
Published: 01 November 2004
|
|
PACS: |
42.55.Wd
|
(Fiber lasers)
|
|
42.60.Da
|
(Resonators, cavities, amplifiers, arrays, and rings)
|
|
|
|
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|