Original Articles |
|
|
|
|
Synthesis of Boron-Rich Cubic B(CxN1-x) Compounds |
GUO Li-Cong;HU Wen-Tao;HE Ju-Long;YU Dong-Li;LIU Shi-Min;LI Dong-Chun;TIAN Yong-Jun |
Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004 |
|
Cite this article: |
GUO Li-Cong, HU Wen-Tao, HE Ju-Long et al 2005 Chin. Phys. Lett. 22 3141-3143 |
|
|
Abstract B2CN precursor is prepared by a mechanical vibration-milling process using amorphous boron, graphite and h-BN powders with mole ratio of 1:1:1. A mixture of precursor and Ca3B2N4 catalyst is treated under high pressure and high temperature. A boron rich cubic B(CxN1-x) phase is obtained after removing the catalyst by acid treatment. The average C content of the boron-rich cubic phase is about 6 at.% detected by energy-dispersive x-ray analysis spectroscopy. It is found that the highest carbon content in the cubic phase is as large as 16 at.%.
|
Keywords:
62.50.+p
81.20.-n
|
|
Published: 01 December 2005
|
|
PACS: |
62.50.+p
|
|
|
81.20.-n
|
(Methods of materials synthesis and materials processing)
|
|
|
|
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|