GENERAL |
|
|
|
|
A New Approach for Residual Stress Analysis of GH3535 Alloy by Using Two-Dimensional Synchrotron X-Ray Diffraction |
Sheng Jiang1,2*, Ji-Chao Zhang1, Shuai Yan1, and Xiao-Li Li2 |
1Shanghai Advanced Research Institute, Chinese Academy of Sciences, Shanghai 201210, China 2Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201203, China
|
|
Cite this article: |
Sheng Jiang, Ji-Chao Zhang, Shuai Yan et al 2020 Chin. Phys. Lett. 37 070701 |
|
|
Abstract We propose a new method to evaluate residual stress based on the analysis of a portion of a Debye ring with two-dimensional synchrotron x-ray diffraction. The residual stress of a nickel-based alloy GH3535 evaluated by the proposed method is determined to be $-1149\pm34$ MPa based on the quantitative analysis of the deformation of the (200) reflection, and the residual stress obtained by analyzing THE (111) plane is $-933\pm 68$ MPa. The results demonstrate that the GH3535 alloy surface is highly compressive, as expected for a polishing surface treatment. The proposed method provides insight into the field of residual stress measurement and quantitative understanding of the residual stress states in GH3535.
|
|
Received: 31 December 2019
Published: 21 June 2020
|
|
PACS: |
07.85.Qe
|
(Synchrotron radiation instrumentation)
|
|
68.35.Gy
|
(Mechanical properties; surface strains)
|
|
61.66.Dk
|
(Alloys )
|
|
61.72.Dd
|
(Experimental determination of defects by diffraction and scattering)
|
|
|
Fund: Supported by the National Key Scientific Instrument and Equipment Development Projects of China under Grant No. 2017YFA0403401, the Natural Science Foundation of Shanghai under Grant No. 18ZR1448100, and the National Natural Science Foundation of China under Grant Nos. 11705270 and 11104307. |
|
|
[1] | Jiang M H, Xu H J and Dai Z M 2012 Bull. Chin. Acad. Sci. 27 366 (in Chinese) |
[2] | Gao J, Huang H F, Liu J H et al. 2018 Appl. Phys. 123 205901 |
[3] | Gao J, Huang H F, Liu Z J et al. 2019 J. Appl. Phys. 125 055901 |
[4] | Liu T, Dong J S, Wang L et al. 2015 J. Mater. Sci. & Technol. 31 269 |
[5] | Yu K, Jiang Z G, Leng B et al. 2016 Opt. Laser Technol. 81 18 |
[6] | Shi Y, Zheng C, Ren M Q et al. 2017 Polymer 123 137 |
[7] | Wei Y, Cheng H B, Wang X Y et al. 2012 Appl. Phys. Lett. 101 231909 |
[8] | Badawi K F, Villain P, Goudeau P et al. 2002 Appl. Phys. Lett. 80 4705 |
[9] | Welzel U, Kumar A and Mittemeijer E J 2009 Appl. Phys. Lett. 95 111907 |
[10] | Kurz S J B, Welzel U, Bischoff E et al. 2014 J. Appl. Crystallogr. 47 291 |
[11] | Zhang J M and Xu K W 2005 Chin. Phys. 14 1866 |
[12] | Tanaka K 2018 J. Appl. Crystallogr. 51 1329 |
[13] | Zhang Z W, Feng Y F, Tan Q et al. 2019 Mater. & Des. 166 107603 |
[14] | Gelfi M, Vecchia G M L, Lecis N et al. 2005 Surf. Coat. Technol. 192 263 |
[15] | Gelfi M, Bontempi E, Roberti R et al. 2004 Acta Mater. 52 583 |
[16] | Gelfi M, Bontempi E, Roberti R et al. 2004 Thin Solid Films 450 143 |
[17] | Sasaki T, Takahashi S, Iwfuchi K et al. 2006 Mater. Sci. Forum 524 381 |
[18] | Sasaki T, Koda K, Fujimoto Y et al. 2014 Adv. Mater. Res. 922 167 |
[19] | Sasaki T, Maruyama Y, Ohba H et al. 2014 J. Instrum. 9 C07006 |
[20] | Shabadi R, Ionescu M, Jeandin et al. 2018 Mater. Sci. Forum 941 2407 |
[21] | Zhu P F, Gou G Q, Li Z F et al. 2019 Int. J. Mod. Phys. B 33 1940032 |
[22] | Mitsui S, Sasaki T, Arai Y et al. 2019 Nucl. Instrum. Methods Phys. Res. Sect. A 924 441 |
[23] | Sasaki T, Ishikawa F and Takahasi M 2016 Appl. Phys. Lett. 108 012102 |
[24] | Hammer R, Todt J, Keckes J et al. 2017 Mater. & Des. 132 72 |
[25] | Connolly M, Park J S, Bradley P et al. 2018 Rev. Sci. Instrum. 89 063701 |
[26] | Izumi A, Kakara T, Otsuki M W et al. 2019 Polymer 182 121857 |
[27] | Jiang L, Ye X X, Wang D J et al. 2020 Nucl. Sci. Tech. 31 6 |
[28] | Zhang L L, Yan S, Jiang S et al. 2015 Nucl. Sci. Tech. 26 060101 |
[29] | Hammersley A P, Svensson S O, Hanfland M et al. 1996 High Press. Res. 14 235 |
[30] | Eigenmann B and Macherauch E 1996 Mater. Sci. Eng. Technol. 27 426 |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|