1Key Lab of In-fiber Integrated Optics (Ministry of Education), Harbin Engineering University, Harbin 150001 2Department of Physics, Harbin Institute of Technology, Harbin 150001
Abstract:We propose a novel all fiber Mach–Zehnder interferometer (MZI) based on photonic crystal fiber (PCF) filled with liquid crystal (LC). The interference between the core mode and the cladding modes of a PCF is utilized. To excite the cladding modes, a region is formed using fiber fusion splicer. Due to the fact that varying effective index difference between the core region and the LC-filled cladding region can cause different transmission spectra, we mainly study the MZIs with different LC-filled structures and different lengths of LC filling. The measured results demonstrate that quite clear interference spectra can be obtained. Through analysis spatial frequency spectrum and temperature spectrum of two MZIs with different LC-filled structures, we can obtain that the MZI with adjacent two LC-filled holes has clearer interference spectrum and higher temperature sensitivity. Thus we choose this MZI to measure the temperature sensitivity with different lengths of LC filling. When the length of LC filling is 2 cm, the temperature sensitivities can be enlarged to 1.59 nm/$^{\circ}\!$C. The interferometer shows a good temperature tunability and sensitivity, which can be a good candidate for a highly tunable optical filtering and temperature sensing applications.