Torsional Vibrations of a Cantilever with Lateral Friction in a Resonance Friction Microscope
CHEN Jian-Song1, GE Yun2**, ZHANG Hui3**
1School of Mechanical Engineering, Southeast University, Nanjing 211189 2School of Electronics Science and Engineering, Nanjing University, Nanjing 210093 3Laboratory of Modern Acoustics, Institute of Acoustics, Nanjing University, Nanjing 210093
Torsional Vibrations of a Cantilever with Lateral Friction in a Resonance Friction Microscope
CHEN Jian-Song1, GE Yun2**, ZHANG Hui3**
1School of Mechanical Engineering, Southeast University, Nanjing 211189 2School of Electronics Science and Engineering, Nanjing University, Nanjing 210093 3Laboratory of Modern Acoustics, Institute of Acoustics, Nanjing University, Nanjing 210093
摘要A model of fundamental torsional vibration of a cantilever with lateral friction is presented by using the harmonic balance method. The model demonstrates that the torsional vibration has close relations with the lateral friction threshold, the lateral contact stiffness and the torsional vibration amplitude of the cantilever. When the threshold is larger than a product of the stiffness and the vibration amplitude, the lateral friction is a linear force with the amplitude. If the lateral friction threshold is less than the product, the motions of the tip on the sample can be stick-slip or slip motions. The results are useful to optimize and to manipulate the fundamental flexural vibration of the piezo-cantilever, and give an insight into the tribological characterization of the interface in a resonance friction microscope.
Abstract：A model of fundamental torsional vibration of a cantilever with lateral friction is presented by using the harmonic balance method. The model demonstrates that the torsional vibration has close relations with the lateral friction threshold, the lateral contact stiffness and the torsional vibration amplitude of the cantilever. When the threshold is larger than a product of the stiffness and the vibration amplitude, the lateral friction is a linear force with the amplitude. If the lateral friction threshold is less than the product, the motions of the tip on the sample can be stick-slip or slip motions. The results are useful to optimize and to manipulate the fundamental flexural vibration of the piezo-cantilever, and give an insight into the tribological characterization of the interface in a resonance friction microscope.
CHEN Jian-Song;GE Yun**;ZHANG Hui**. Torsional Vibrations of a Cantilever with Lateral Friction in a Resonance Friction Microscope[J]. 中国物理快报, 2012, 29(1): 10701-010701.
CHEN Jian-Song, GE Yun**, ZHANG Hui**. Torsional Vibrations of a Cantilever with Lateral Friction in a Resonance Friction Microscope. Chin. Phys. Lett., 2012, 29(1): 10701-010701.
[1] Gnecco E, Bennewitz R and Meyer E 2002 Phys. Rev. Lett. 88 215501 [2] Yurtsever A, Gigler A M, Macias E and Stark R W 2007 Appl. Phys. Lett. 91 253120 [3] Zou Y, Cai J, Wan M Z, Lv P and Guan Q F 2011 Chin. Phys. Lett. 28 116102 [4] Reinstadtler M, Rabe U, Scherer V, Hartmann U, Goldade A, Bhushan B and Arnold W 2003 Appl. Phys. Lett. 82 2604 [5] Kryov S Y, Dijksman J A, Van Loo W A and Frenken J W 2006 Phys. Rev. Lett. 97 166103 [6] Li Y and Qian J Q 2009 Chin. Phys. Lett. 26 100703 [7] Yamanaka K and Nakano S 1998 Appl. Phys. A 66 S313 [8] Reinstadtler M, Rabe U, Goldade A, Bhushan B and Arnold W 2005 Tribology Int. 38 533 [9] Zhang H, Zhang S Y, Chen Z J and Fan L 2010 IEEE Trans. Ultrason. Ferroelect. Freq. Control. 57 1140 [10] Yang B D, Chu M L and Meng C H 1998 J. Sound Vibration 210 461
2012, Vol. 29 
