摘要Rayleigh wave hydrogen sensors based on 128° YX−LiNbO3 substrates with WO3 sensing layers operating at room temperature are studied. The experimental results indicate that the WO3 layers obtained by a sol−gel method have much higher sensitivities because the sensing layers produced by the sol-gel method have small grains and high roughness and porosity. It is also confirmed that in the sol-gel method, keeping WO3 solutions at low temperature and/or decreasing the viscosity of the solutions can decrease the grain sizes and increase the hydrogen-absorbability of the sensing layer. Under the optimized preparation conditions, the high sensitivity of the hydrogen sensors at room temperature is obtained, in which 1% hydrogen in natural air induces the frequency shift of 72 kHz at the operating frequency of 124.2 MHz.
Abstract:Rayleigh wave hydrogen sensors based on 128° YX−LiNbO3 substrates with WO3 sensing layers operating at room temperature are studied. The experimental results indicate that the WO3 layers obtained by a sol−gel method have much higher sensitivities because the sensing layers produced by the sol-gel method have small grains and high roughness and porosity. It is also confirmed that in the sol-gel method, keeping WO3 solutions at low temperature and/or decreasing the viscosity of the solutions can decrease the grain sizes and increase the hydrogen-absorbability of the sensing layer. Under the optimized preparation conditions, the high sensitivity of the hydrogen sensors at room temperature is obtained, in which 1% hydrogen in natural air induces the frequency shift of 72 kHz at the operating frequency of 124.2 MHz.
[1] Ippolito S J, Kandasamy S, Kalantar-zadeh K, Wlodarski W, Galatsis K, Kiriakidis G, Katsarakis N and Suchea M 2005 Sens. Actuators B 111-112 207
[2] Ippolito S J, Kandasamy S, Kalantar-Zadeh K and Wlodarski W 2005 Sens. Actuators B 108 553
[3] Ippolito S J, Kandasamy S, Kalantar-zadeh K, Wlodarski W and Holland A 2006 Smart Mater. Struct. 15 S131
[4] Fechete A C, Wlodarski W, Kalantar-Zadeh K, Holland A S, Antoszewski J, Kaciulis S and Pandolfi L 2006 Sens. Actuators B 118 362
[5] Jakubik W P 2007 Thin Solid Films 515 8345
[6] Arsat R, Breedon M, Shafiei M, Spizziri P G, Gilje S, Kaner R B, Kalantar-zadeh K and Wlodarski W 2008 Chem. Phys. Lett. 467 344
[7] Sadek A Z, Wlodarski W, Shin K, Kaner R B and Kalantar-zadeh K 2008 Synth. Met. 158 29
[8] Arsat R, Yu X F, Li Y X, Wlodarski W and Kalantar-zadeh K 2009 Sens. Actuators B 137 529
[9] Mashat L A, Tran H D, Wlodarski W, Kaner R B and Kalantar-zadeh K 2008 Sens. Actuators B 134 826
[10] Huang F C, Chen Y Y and Wu T T 2009 Nanotechnology 20 065501
[11] Atashbar M Z, Sadek A Z, Wlodarski W, Sriram S, Bhaskaran M, Cheng C J, Kaner R B and Kalantar-zadeh K 2009 Sens. Actuators B 138 85
[12] Schjrmer O F, Wittwer V, Baur G and Brand G 1977 J. Electrochem. Soc. 124 794
[13] Wittwer V, Schjrmer O F and Schlotter P 1978 Solid State Commun. 25 977
[14] Porqueras I and Bertran E 2000 Thin Solid Films 377 8
[15] Shanak H, Schmitt H, Nowoczin J and Ziebert C 2004 Solid State Ionics 171 99
[16] Ohtsuka T, Goto N and Sato N 1990 Electroanal. Chem. 287 249
[17] Steveson K J and Hupp J T 1999 Electrochem. Solid-State Lett. 2 497
[18] Cronin J P, Tarico D J, Agrawal A and Zhang L 1994 US patent 277 986
[19] Cronin J P, Tarico D J, Tonazzi J C, Agrawal A and Kennedy S R 1993 Sol. Energy Mater. Sol. Cells 29 371
[20] Ou H C and Zaghloul M 2010 IEEE Electron. Device Lett. 31 518