摘要In order to find the drag reduction mechanism of surface wettability, some experiments are carried out to research the flow of deionized water through microtubes. The flow rate of liquid through microtubes adsorbing Fluoro–Alkyl silanes (FAS) or not are compared. The inner diameters of the microtubes are 100 µm, 75 µm and 50 µm, respectively. The relations of shear rate and slip velocity, and shear rate and slip length are discussed. The inner surface wettability of the microtubes changes from hydrophilic at a contact angle of 23° to weak hydrophobic at a contact angle of 107° by adsorbing FAS. The results indicate that the flow rate in microtubes adsorbing FAS is larger than those without FAS, the efficiency of drag reduction if about 13%, the slip velocity near the wall is proportional to the shear rate and the slip length remains invariant for different shear rates in microtubes with different diameters.
Abstract:In order to find the drag reduction mechanism of surface wettability, some experiments are carried out to research the flow of deionized water through microtubes. The flow rate of liquid through microtubes adsorbing Fluoro–Alkyl silanes (FAS) or not are compared. The inner diameters of the microtubes are 100 µm, 75 µm and 50 µm, respectively. The relations of shear rate and slip velocity, and shear rate and slip length are discussed. The inner surface wettability of the microtubes changes from hydrophilic at a contact angle of 23° to weak hydrophobic at a contact angle of 107° by adsorbing FAS. The results indicate that the flow rate in microtubes adsorbing FAS is larger than those without FAS, the efficiency of drag reduction if about 13%, the slip velocity near the wall is proportional to the shear rate and the slip length remains invariant for different shear rates in microtubes with different diameters.
[1] Tao R, Quan X B and Xu J Z 2001 Engin. Therm. Phys. 22 575
[2] Pfahler J et al 1991 Am. Soc. Mech. Engin. 32 49
[3] Song F Q 2004 Ziran Zazhi 26 128 (in Chinese)
[4] Peiyi Wu and Little W A 1983 Cryogenics 23 73
[5] Pfahler J et al 1990 Am. Soc. Mech. Engin. 19 149
[6] Mara G M and Li Dong Q 1999 Heat and Fluid Flow 20 142
[7] Zhang S S, Han K J and Cheng J 2007 Instrum. Tech. Sensors 3 46 (in Chinese)
[8] Li Z H, Zhou X B and Zhu S N 2002 Acta Mech. Sin. 34 432 (in Chinese)
[9] Hao X Q, Wang L, Ding Y C, He Z B and Lu B H 2009 Lubrication and Engineering 34 26 (in Chinese)
[10] Huo S B, Yu J Z, Li Y F, Liu Y, Sun X Y and Song S P 2007 Chem. Indust. Engin. 58 2721 (in Chinese)
[11] Tretheway D and Meinhart C 2002 Phys. Fluids 14 912
[12] Tretheway D and Meinhart C A 2004 Phys. Fluids 16 1509
[13] Hao P F, Wang X Y, Yao Z H and Zhu K Q 2009 J. Exp. Fluid Mech. 23 715 (in Chinese)
[14] Zuo J C 2009 Mast Dissertation (ZheJiang: Zhejiang Normal University)
[15] Hannon L, Lie G C and Clementi E 1986 Phys. Lett. A 119 174
[16] Bhattacharya DK and Lie G C 1989 Phys. Rev. Lett. 62 897
[17] Thompson P A and Robbins M 1989 Phys. Rev. Lett. 63 766
[18] Sun M and Ebner C 1992 Phys. Rev. A 46 4813
[19] Wu C W and Ma G J 2004 Sci. Chin. G: Phys. Mech. Astron. 34 681
[20] Song F Q, Wang J D and Liu H L 2010 Chin. Phys. Lett. 27 024704
[21] Zhao S L 2008 Mast Dissertation (Liaoning: DaLian University of Technology)
[22] Jiang R J, Song F Q and Li H M 2006 Chin. Phys. Lett. 23 3305