摘要Feasibility of measuring stress distributions of orthotropic composite materials and structures in plane stress state by the lock-in infrared thermography technique is analyzed and stress distributions of a lap joint structure made of a kind of glass reinforced plastic composite lamination plates under tensile loadings are obtained by the lock-in infrared thermography technique. Feasibility and credibility of using this technique to measure stress distributions of orthotropic composite materials and structures in plane stress state are proved by comparing the results with the data given by the digital speckle correlation method.
Abstract:Feasibility of measuring stress distributions of orthotropic composite materials and structures in plane stress state by the lock-in infrared thermography technique is analyzed and stress distributions of a lap joint structure made of a kind of glass reinforced plastic composite lamination plates under tensile loadings are obtained by the lock-in infrared thermography technique. Feasibility and credibility of using this technique to measure stress distributions of orthotropic composite materials and structures in plane stress state are proved by comparing the results with the data given by the digital speckle correlation method.
(Measurement methods and techniques in continuum mechanics of solids)
引用本文:
LI Xu-Dong**;WANG Wei-Bo;LI Yong-Sheng;WU Dong-Liu
. Measuring Stress Distributions of Orthotropic Composite Material in Plane Stress State by the Lock-in Infrared Thermography Technique[J]. 中国物理快报, 2011, 28(6): 64601-064601.
LI Xu-Dong**, WANG Wei-Bo, LI Yong-Sheng, WU Dong-Liu
. Measuring Stress Distributions of Orthotropic Composite Material in Plane Stress State by the Lock-in Infrared Thermography Technique. Chin. Phys. Lett., 2011, 28(6): 64601-064601.
[1] Li X D, Liu K X, Zhang G S, Wen S G and Tan F L 2008 Chin. Phys. Lett. 25 2965
[2] Busse G, Wu D and Karpen W 1992 J. Appl. Phys. 71 3962
[3] Peyroux R, Chrysochoos A, Licht C and Lobel M 1998 Int. J. Engng Sci. 36 489
[4] Li X D, Liu X, Liu J Y and Wu D L 2011 Eng. Mech. 28 (in print) (in Chinese)
[5] Pitarresi G, Acquisto L D and Siddiolo A M 2008 J. Strain Anal. 43 493
[6] George S, Goravar S, Mishra D, Shyamsunder M T, Sharma P, Padmashree G K, Kumar P S, Bremond P and Mukherjee K 2010 Insight 52 470
[7] Dulieu-Barton J M and Stanley P 1998 J. Strain Anal. 33 93
[8] Emery T, Dulieu-Barton J M and Cunningham P R 2005 Key Eng. Mater. 293–294 583