Numerical Simulation and Experimental Analysis of Photonic Band Gap in Hollow-Core Photonic Crystal Fibres
YUAN Jin-Hui1, HOU Lan-Tian1, ZHOU Gui-Yao1, WEI Dong-Bin1, CHEN Chao1, WANG Qing-Yue2, HU Ming-Lie2, LIU Bo-Wen2
1Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinghuangdao 0660042Ultrafast Laser Laboratory,. College of Precision Instrument and Optoelectronics Engineering, Tianjin University, Tianjin 300072
Numerical Simulation and Experimental Analysis of Photonic Band Gap in Hollow-Core Photonic Crystal Fibres
1Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinghuangdao 0660042Ultrafast Laser Laboratory,. College of Precision Instrument and Optoelectronics Engineering, Tianjin University, Tianjin 300072
摘要Based on the full-vector plane-wave method (FVPWM), a hollow-core photonic crystal fibre (HC-PCF) fabricated by using the improved stack-and-draw technique is simulated. Under given propagation constants β, several effective photonic band gaps with different sizes emerge within the visible wavelength range from 575 to 720nm. The fundamental mode and second-order mode lying in a part of PBGs are investigated. In the transmission spectrum tested, the positions of PBGs are discovered to be shifting to shorter wavelengths. The main reason is the existence of interstitial holes at nodes in the cladding region. In the later experiment, green light is observed propagating in the air-core region, and the result is more consistent with our theoretical simulation.
Abstract:Based on the full-vector plane-wave method (FVPWM), a hollow-core photonic crystal fibre (HC-PCF) fabricated by using the improved stack-and-draw technique is simulated. Under given propagation constants β, several effective photonic band gaps with different sizes emerge within the visible wavelength range from 575 to 720nm. The fundamental mode and second-order mode lying in a part of PBGs are investigated. In the transmission spectrum tested, the positions of PBGs are discovered to be shifting to shorter wavelengths. The main reason is the existence of interstitial holes at nodes in the cladding region. In the later experiment, green light is observed propagating in the air-core region, and the result is more consistent with our theoretical simulation.
(Basis sets (LCAO, plane-wave, APW, etc.) and related methodology (scattering methods, ASA, linearized methods, etc.))
引用本文:
YUAN Jin-Hui;HOU Lan-Tian;ZHOU Gui-Yao;WEI Dong-Bin;CHEN Chao;WANG Qing-Yue;HU Ming-Lie;LIU Bo-Wen. Numerical Simulation and Experimental Analysis of Photonic Band Gap in Hollow-Core Photonic Crystal Fibres[J]. 中国物理快报, 2008, 25(5): 1541-1544.
YUAN Jin-Hui, HOU Lan-Tian, ZHOU Gui-Yao, WEI Dong-Bin, CHEN Chao, WANG Qing-Yue, HU Ming-Lie, LIU Bo-Wen. Numerical Simulation and Experimental Analysis of Photonic Band Gap in Hollow-Core Photonic Crystal Fibres. Chin. Phys. Lett., 2008, 25(5): 1541-1544.