Thermal diffusion of dopants is investigated in the process of generating the graded-index profile of plastic optical fibres. Because the diffusion coefficient in high polymers has been shown to depend strongly on dopant concentration, it is allowed in this work to vary with the radial coordinate of the multistep-core fibre. A novel multi-layer model is presented for solving the diffusion equation with the variable diffusion coefficient. It is solved by the finite difference method. The solution determines the dopant diffusion profile in the fibre. It is verified against a solution from the literature and two cases of fibres with diffused profiles. The application is demonstrated on two examples of graded-index plastic optical fibres, one originally with a two-step and the other with four-step core. The results indicate that closer to the core-cladding interface, the computed diffused profile with variable diffusion coefficient D is closer to target profile than the profile obtained with constant D for the same time of thermal process.
Thermal diffusion of dopants is investigated in the process of generating the graded-index profile of plastic optical fibres. Because the diffusion coefficient in high polymers has been shown to depend strongly on dopant concentration, it is allowed in this work to vary with the radial coordinate of the multistep-core fibre. A novel multi-layer model is presented for solving the diffusion equation with the variable diffusion coefficient. It is solved by the finite difference method. The solution determines the dopant diffusion profile in the fibre. It is verified against a solution from the literature and two cases of fibres with diffused profiles. The application is demonstrated on two examples of graded-index plastic optical fibres, one originally with a two-step and the other with four-step core. The results indicate that closer to the core-cladding interface, the computed diffused profile with variable diffusion coefficient D is closer to target profile than the profile obtained with constant D for the same time of thermal process.
M. S. Kovacevic;A. Djordjevich. Thermal Diffusion Process Estimation for Fabrication of Graded Plastic Optical Fibre[J]. 中国物理快报, 2008, 25(11): 4030-4033.
M. S. Kovacevic, A. Djordjevich. Thermal Diffusion Process Estimation for Fabrication of Graded Plastic Optical Fibre. Chin. Phys. Lett., 2008, 25(11): 4030-4033.
[1] Zubia J and Arrue J 2001 Opt. Fiber Technol. 7 101 [2] Koeppen C et al 1998 J. Opt. Soc. Am. B 15 717 [3] Bunge C A and Poisel H 2007 POF Modeling: Theory, Measurement and Application (Herstellung und Verlag: Books on Demand GmbH, Norderstedt) [4] Ghatak A and Thyagarajan K 1998 Introduction to Fiber Optics (Cambridge: Cambridge University Press) p 65 [5] Levfin V et al 1999 Proc. ICPOF p98 [6] Irie K, Uozu Y and Yoshimura T 2001 Proc. ICPOF p73 [7] Lee S et al 2003 Microwave Opt. Technol. Lett. 39 129 [8] Crank J 1975 The Mathematics of Diffusion (Oxford: Clarendon) [9] Djordjevich A and Savovic S 2005 Opt. Eng. 44 095003-1 [10] Sadiku M 1992 The Numerical Techniques in Electromagnetic (Boca Raton, FL: CRC Press) p 141
2008, Vol. 25 
