Microstructure and Properties of Cr3Si/γ-Fe Composite Coating Prepared by Plasma Transferred Arc Cladding Technique
LIU Yuan-Fu1,3, CHEN De-Qiang1, HAN Jian-Min1, WU Hao2, XU Xiang-Yang1, YANG Si-Ze3
1Institute of Materials Science and Engineering, Beijing Jiaotong University, Beijing 1000442School of Materials Science and Engineering, Beihang University, Beijing 1000833Institute of Physics, Chinese Academy of Sciences, Beijing 100080
Microstructure and Properties of Cr3Si/γ-Fe Composite Coating Prepared by Plasma Transferred Arc Cladding Technique
LIU Yuan-Fu1,3, CHEN De-Qiang1, HAN Jian-Min1, WU Hao2, XU Xiang-Yang1, YANG Si-Ze3
1Institute of Materials Science and Engineering, Beijing Jiaotong University, Beijing 1000442School of Materials Science and Engineering, Beihang University, Beijing 1000833Institute of Physics, Chinese Academy of Sciences, Beijing 100080
摘要Under optimized operating parameters, a wear and corrosion resistant Cr3Si/γ-Fe composite coating is fabricated on a normalized 0.45% carbon steel substrate by using the plasma transferred arc (PTA) cladding technique with Fe-Cr-Si elemental powder blend as the precursor material. Microstructure, microhardness, dry-sliding wear resistance and electrochemical corrosion characteristic of the coating are evaluated. Test results show that the composite coating is mainly composed of primary Cr3Si dendrites and the interdendritic supersaturated iron-base solid solution γ-Fe. Between the Cr3Si/γ-Fe composite coating and the normalized 0.45% carbon steel substrate, there is a narrow metallurgical bonding zone. The Cr3Si/γ-Fe composite coating exhibits high microhardness, excellent wear and corrosion resistance under test conditions.
Abstract:Under optimized operating parameters, a wear and corrosion resistant Cr3Si/γ-Fe composite coating is fabricated on a normalized 0.45% carbon steel substrate by using the plasma transferred arc (PTA) cladding technique with Fe-Cr-Si elemental powder blend as the precursor material. Microstructure, microhardness, dry-sliding wear resistance and electrochemical corrosion characteristic of the coating are evaluated. Test results show that the composite coating is mainly composed of primary Cr3Si dendrites and the interdendritic supersaturated iron-base solid solution γ-Fe. Between the Cr3Si/γ-Fe composite coating and the normalized 0.45% carbon steel substrate, there is a narrow metallurgical bonding zone. The Cr3Si/γ-Fe composite coating exhibits high microhardness, excellent wear and corrosion resistance under test conditions.
[1] Deuis R L, Bee J V and Subramanian C 1997 ScriptaMaterialia 37 721 [2] Yang L J and Loh N L 1995 Surf. Coat. Technol. 71 196 [3] Aoh J N and Chen J C 2001 Wear 250 611 [4] Chen H, Li H Q and Sun Y Z 2006 Surf. Coat. Technol. 200 4741 [5] Serkan O, Bulent K, Ilyas S and Nuri O 2008 Surf.Coat. Technol. 202 3633 [6] Sudha C, Shankar P et al 2008 Surf. Coat. Technol. 202 2103 [7] Bourithis L, Papaefthymiou S and Papadimitriou G D 2002 Appl. Surf. Sci. 200 203 [8] Leylavergne M, Chartier T, Denoirjean A et al 2001 Thin Solid Films 391 1 [9] Gatto A, Bassoli E and Fornari M 2004 Surf. Coat.Technol. 187 265 [10] Bourithis L and Papadimitriou G 2003 Mater. Lett. 57 1835 [11] Liu Y F, Deng F P et al 2007 Chin. Phys. Lett. 24 3469 [12] Shivani A, Ankur J, Chhagan L et al 2007 Appl. Surf.Sci. 253 4721 [13] Fernandes Bruno B, Geovani R, Coelho Gilberto C and RamosAlfeu S 2005 Mater. Sci. Eng. A 405 135 [14] Raj S V 1999 Intermetallics 7 743 [15] Duan G and Wang H M 2002 Scripta Materialia 46 107 [16] Raj S V 1995 Mater. Sci. Eng. A 201 229